Decks & Patios in Studio City
Studio City decks and patios built in a fixed order: footings poured and inspected, concrete cured, then framing, flashing and fire-listed surface boards.
Concrete cure time paces everything that follows on a Studio City deck. Footings are poured, inspected and left to cure before a beam rests on them, and everything after that waits on those days. Framing, hangers, flashing and the surface follow in a fixed order, which is why the drawings and the choice of boards are settled before the first hole is dug.
Footings and the pour
The yard is marked, utilities are located and the holes are dug to the depth the drawing calls for. An inspector sees each hole open, with the rebar set and the bottom clean, and only then does the concrete arrive. Post bases are set into the wet pour or bolted on after it hardens, depending on the detail. Weather and cure time decide how soon framing can start, so the schedule leaves room for it and no beam is set on concrete that is still green.
Framing outward from the house
Once the piers have gained strength, the ledger goes onto the wall with flashing tucked behind the siding or stucco. Next come posts, beams and joists, then hangers and bracing, and the framing is inspected before anything covers it. Last come the surface boards, the rail and the stair guard. Finish items such as lighting sleeves, a gas stub for a grill and a low-voltage run for stair lights are routed through the frame before decking, because reaching them afterward means taking boards up. The skirting or the open clearance beneath the frame is settled at this stage too.
About our Decks & Patios serviceEverything we build in Studio City
Decks & Patios in Studio City: questions
Mapping decides, and we check the address before any board is picked. A designated lot calls for decking with a fire listing and an underside framed to match. A lot outside the designation follows ordinary code, which leaves the choice open. Either way a product's listing is confirmed before the order goes in.
Two inspections come ahead of the surface. The footing holes are looked at before concrete goes in, with depth, width and steel visible. After the concrete cures and the frame is built, the posts, beams, hangers and ledger connection are inspected before any decking covers them.
Yes, and a shared pour is the practical gain. Deck piers can be drilled and poured on the day the house foundation is placed, so the concrete trucks only have to come once. The deck frame then rises with the house framing, and its inspections ride along with the house schedule.
Decks & Patios in other cities
More we build in Studio City
What are you building in Studio City?
Tell us about the property and what you have in mind. We reply with a written next step.