Decks & Patios in Sherman Oaks
Sherman Oaks decks and patios drawn for LADBS review: guard spacing, stair details, footings and ledger attachment shown clearly before any boards are cut.
Open spacing in a guard gets measured on paper long before it is measured on site. For a Sherman Oaks deck, LADBS looks at how far apart the balusters sit, how high the top rail stands and how the posts tie into the framing. A rail that fails on the sheet comes back as a correction, which costs more time than drawing it right the first time.
Guards and stairs on the sheet
A guard has to stop a sphere 4 inches across from passing through any opening, and the top rail of a residential deck has to stand 36 inches high. The drawing shows both, along with a post attachment that resists a hard push from a person leaning on it. Stairs get the same treatment: even risers, a landing where the door opens, and a handrail a hand can wrap around. When these details are drawn out, the reviewer has nothing to guess at and the carpenter has a clear target.
Footings and the ledger
Behind the rail the reviewer reads the structure. Footing depth and width are tied to the soil bearing value, posts are sized for the height they carry, and the ledger is shown bolted to the house framing with flashing laid above and behind it. A deck standing 30 inches or more above grade draws extra attention to those connections. Hangers, bolts and post bases are named by type so the inspector can match them on site. Where a span or a load looks unusual, the engineer's calculation goes in the set.
About our Decks & Patios serviceEverything we build in Sherman Oaks
Decks & Patios in Sherman Oaks: questions
Sherman Oaks addresses are checked one at a time. When wildfire mapping reaches a lot, the surface must be a tested ember-resistant product and the underside is detailed to match. On an unmapped lot ordinary code governs. Listed samples come out either way, so board and paperwork get chosen together.
The guard posts and stair framing are examined along with the structure, since boards would hide the blocking behind them. The inspector checks that posts are anchored to take sideways force, that stringers bear on solid supports and that the ledger bolts and flashing match the approved drawing.
Yes. When the house framing is new, the rim joist can be built to take the ledger, with blocking already placed where the guard posts will land. That saves cutting into finished walls later, and the deck can be shown on the same plan set that the house goes through.
Decks & Patios in other cities
More we build in Sherman Oaks
What are you building in Sherman Oaks?
Tell us about the property and what you have in mind. We reply with a written next step.