Full Home Remodeling in Altadena
Whole-house remodeling in Altadena starting with the ducts, then a staged scope that accounts for mapped fire hazard rules and county permit review.
Ducts keep a record of where smoke went. Before any Altadena remodel is priced, we pull a register cover and run a light and a camera down the trunk line, because soot inside the metal shows how far the odor traveled. Mapped fire hazard zones reach into Altadena, so the visit also notes the vents and eaves that may need ember-resistant upgrades.
What the duct run shows
A clean duct and a sooty one lead to two different scopes. Soot in the trunk line and branch runs points to rooms the smoke reached even when the walls look fine. Flex duct with crushed or scorched sections is replaced. Metal duct may be cleaned, then pressure tested. The air handler is checked too, since its filter and coil hold odor. Findings are written room by room, which keeps the whole-house scope tied to evidence. Ductwork that stays is labeled in the scope so the choice is clear.
Rules that may apply to the finished house
Altadena is unincorporated, so Los Angeles County reviews the building permit. With mapped fire hazard zones in the community, a parcel there could be subject to ember-resistance requirements for roofing, vents, eaves and windows. We ask early which rules apply to your parcel and put each requirement in the scope as its own line. That keeps the exterior upgrades visible and answers the plan checker's questions before they arrive. Smoke alarm positions appear on the plan too. Alarm locations are shown on the plan too.
About our Full Home Remodeling serviceEverything we build in Altadena
Full Home Remodeling in Altadena: questions
Yes, when the frame is sound. Insulation and drywall come out, the studs are cleaned and probed, and weak members are swapped for new lumber. The result is a bare frame to build from, with each repair recorded in the scope so it can be matched to an adjuster's estimate.
Protection and demolition lead, then structural repair, then new pipes, circuits and ducts, and finally closed walls and finishes. Exterior work that falls under fire hazard rules, such as vents or roofing, is placed early in the sequence so it does not hold up the rest.
Ducts that carried smoke, wiring that sat near heat, and supply and drain piping that shows wear. In a mapped fire hazard area, attic and crawl space vents are worth adding to the list because ember-resistant versions may be required. Everything is listed by room so you can accept or change items.
Full Home Remodeling in other cities
More we build in Altadena
What are you building in Altadena?
Tell us about the property and what you have in mind. We reply with a written next step.