Flooring, Drywall & Interior Finishes in Woodland Hills
Flooring and drywall in Woodland Hills, using fire-rated Type X board where the plans call for it and standard panel everywhere else.
Type X gypsum board has glass fibers in its core, and that core holds together under flame longer than standard panel does. It is the board we hang on the wall and ceiling shared with an attached garage in a Woodland Hills house, and anywhere else the approved plans mark a fire-rated assembly. Standard panel suits the remaining rooms, and each type is taped and finished to match.
Where the heavier panel goes
Beyond the garage wall, the plans may call for Type X around a furnace closet, under a stair or on a ceiling that has living space above a garage. Screws sit closer together than on standard board, joints are staggered between layers, and every pipe or wire that passes through gets sealed with a fire-stop product. The building department inspects the assembly before it is covered, so nothing is hidden until it has been looked at. Fire caulk and rated putty go into each gap around a pipe or cable.
Everywhere else
Bathrooms and the laundry take moisture-resistant panel, and the remaining rooms take standard board finished to a smoothness the lighting calls for. Bright windows on an inland lot show every ripple in a wall, so we hold rooms with big glass to a finer finish. Floors follow once the paint is done, over an underlayment matched to the material you choose, with the choice laid out in the written quote. Ceiling board runs across the joists so the long joints stay out of the line of sight, and corner bead gets set straight before it is covered.
About our Flooring, Drywall & Interior Finishes serviceEverything we build in Woodland Hills
Flooring, Drywall & Interior Finishes in Woodland Hills: questions
Type X is the usual name for it. It covers the garage boundary plus any closet, stair underside or ceiling that the approved plans mark. Seams are staggered and taped, penetrations are sealed, and the building department inspects before the board is covered.
A long level is laid across each room, a screwdriver is pressed into boards near doors and plumbing, and we listen for hollow spots. Soft sections are cut out, ridges are ground down and dips are filled. Underlayment goes in last, and the quote lists the repairs.
Often, but not always. When a panel keeps the odor after cleaning, it comes out, because the smell is in the paper and gypsum. A lighter film may be sealed under primer and left alone. A test opening tells us which case each wall is, and the written scope records it.
Flooring, Drywall & Interior Finishes in other cities
What are you building in Woodland Hills?
Tell us about the property and what you have in mind. We reply with a written next step.