Fire Rebuild & Reconstruction in Claremont
Claremont fire rebuild with roof-to-wall joints flashed in shingle order: step pieces, a kickout at the eave, lapped wrap and a water test before siding.
Rain that runs down a roof and meets a wall is the water most likely to get inside a rebuilt Claremont house, so we treat every roof-to-wall joint as a small project of its own. Each one gets bent metal pieces tucked under the roofing, a diverter at the low end that throws water into the gutter, and house wrap lapped down over the metal so every layer drains onto the one below.
Shingle order at the wall line
Flashing works by overlap, the way shingles do. A single long strip bent along the joint can trap water and push it sideways, so the roofer sets one short bent piece with each course, the upper piece always lying over the lower. Where the roof stops short of the wall at its bottom edge, a diverter turns the flow out past the siding line. Leave that piece out and water rides down the wall face into the corner framing, where rot can spread quietly for a long time before any stain shows indoors.
Wrap, siding and a check with the hose
Once the metal is set, the water-resistive barrier on the wall comes down over its upright leg, never tucked behind it, and the siding or plaster stops a small gap above the roof surface so it cannot wick moisture. Where a tall wall rises above a long run of roof, the flashing legs are made taller to handle the extra water. Before cladding hides anything, we run water over each joint with a hose and watch for drips from inside the attic, then fix what shows.
About our Fire Rebuild & Reconstruction serviceEverything we build in Claremont
Fire Rebuild & Reconstruction in Claremont: questions
First the fire debris clearance has to be signed off. After that, we come out to inspect the slab and the utility caps, and we ask the City of Claremont for the permits already on file for the address. What we find goes into a written scope, laid out stage by stage, with a price on each.
Yes, line by line. Our estimate follows the sequence of construction, with a plain description on every line, which makes it easy to set against the adjuster's version. Flashing a policy may not itemize, such as kickouts or metal counterflashing, appears on lines of its own, so anything beyond like-kind replacement stands out.
A new Claremont house is checked against the state building, residential and fire codes adopted on the date the city accepts the application, with any city amendments. That puts sprinklers, interconnected alarms, seismic bracing and energy measures into every plan set. If the lot is on a state hazard map, the roof, vents and outer walls must also meet ember rules, which we confirm before design.
More we build in Claremont
Plan your project in Claremont
Tell us about the property and what you have in mind. We reply with a written next step.