New Construction in La Verne, Energy Forms That Match the Plans
The La Verne plan checker compares a new house's energy forms with its drawings: wall and roof insulation, windows, equipment and the required solar array.
When the La Verne building department reviews a new house, the energy compliance forms get read against the drawings. The plan checker wants the insulation values, window ratings, heating and water heating equipment and the solar array on the forms to appear the same way on the plans. A mismatch brings a correction. We have the energy consultant model the house we will build, then check each entry before submittal.
Matching forms to sheets
The state energy code lets a house comply by meeting a fixed list of measures or by modeling the whole design. Either path produces forms that list what was assumed: wall and ceiling insulation, window performance, duct location, the heat pump or furnace and the water heater. New homes also need a solar electric system sized by the code's method, unless the roof qualifies for an exception. The reviewer checks that the sheets show each assumed item, and that notes on the plans call for the field tests the forms require.
Verification in the field
Some measures cannot be judged by eye, so a certified third party rater tests them. Duct leakage, fan airflow and the quality of insulation installation are typical examples. The inspector checks the insulation before drywall, and the rater's registered results must be on file before the final inspection can pass. We schedule the rater alongside the inspections so testing happens while ducts and wall cavities are still open, and we keep the signed forms with the permit card for the final visit.
About our New Construction serviceEverything we build in La Verne
New Construction in La Verne: questions
Roof planes with open sun suit the solar array, so the house's shape and roof layout matter early. Send the survey, a soils report and any easements on title. If you already favor a heat pump water heater or an all-electric house, say so, because both choices change the energy model.
Design, the energy model, engineering and city fees are priced before construction. The build follows in order, foundation to finishes, and the solar array, the rater's testing and the heating equipment each show as separate lines. That way each energy choice can be seen in the total.
We set the order. Survey and soils data come in before the designer fixes the footprint, and the structural engineer and energy consultant start only once that footprint holds. Starting them on a moving plan wastes their hours, so we hold each one until the information it depends on is ready.
More we build in La Verne
Plan your project in La Verne
Tell us about the property and what you have in mind. We reply with a written next step.